Random good picture Not show

31. But the quality of the rock wool quality can vary widely, heat preservation function good density low, the tensile strength is also low, durability is poorer.

32. Through defibrination disposal, it can im-prove tensile strength of fibre, break intensity, binding strength and freeness within the inner fibre.

33. An experimental procedure and accompanying method for analyzing recorded data for deriving dynamic tensile strength and elastic modulus of brittle material is presented.

34. As the caprylic aldehyde content increased strain at break and tensile strength were decreased.

35. The resistance, tensile strength and ductibility of formaldehyde's deposit were better than that from sodium hypophosphite solution.

36. Antimony also increases tensile strength but decreases cross section sensitivity of vermiculate cast iron.

37. In a certain range, the tensile strength of composite increases with increasing volume fraction of modified carbonyl iron powder.

38. Pipeline steel adopting the spicular ferrite owns the better properties of forming and anti corrosion for its low ratio of yield strength and tensile strength and uniform microstructure.

39. The optimum process is found by analyzing shear strength and tensile strength of composite plates with different temperatures and rolling reduction ratio.

40. AIM:To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.

41. The indoor lab test results showed that mineral admixture brucite fiber reinforced concrete can improve the flexural tensile strength of concrete.

42. But it is better than the leading-products of synthetic rubber-SBR polybutadiene rubber in tear strength tensile strength and tackiness .

43. It was founded out to fit the heat resistant process of the fluoroelastomer by a lot of tests and measuring the physical properties tests(tensile strength, elongation at break and hardness).

44. Tension control card printing and membership card production speed, the tensile strength of printer materials.

45. Experimental studies show that coal had the lower volume modulus, relatively higher poisson , lower compressive and tensile strength, brittle, easily broken and vulnerable to compression.

46. They developed a new kind of lowalloy which has great tensile strength.

47. The satisfactory tensile strength of block copolymers may be attributed to the formation of allophanate crosslinks by the introduction of excess TDI.

48. The effect of steel bar diameter, reinforcement ratio, concrete tensile strength and cohesive strength between concrete and steel bar on cracking interval and width are analyzed.

49. Figure 1 Tensile strength and microstructure change during hot stamping.

50. In this paper, the relation of tensile strength,[http://sentencedict.com/tensile strength.html] tensile modulus and breaking elongation of unsaturated polyester casting matrix cured at room temperature to curing degree was discussed.

51. The binding straps for mechanical use feature super length and super slimness, light specific weight, low unit cost, good elasticity, flexibility and tensile strength and strong adhesion.

52. Mild steel has a high tensile strength, this being 200 times that of concrete.

53. Most fabrication codes require a minimum as-welded tensile strength of 24 ksi (165 MPa), which is a significant degradation.

54. For grinding of middle and high tensile strength metal , such as carbon steel , alloy steel , hard bronze, forgeable cast iron , ect.

55. The combinable fatliquor SC, phosphate fatliquor, sulfited sperm oil EJB can increase the tensile strength of chrome leather.

56. If the paper tape tension over its tensile strength break occurs.

57. The tensile strength of the anterior talofibular ligaments was determined in 7 amputated legs and fresh cadaveric ankles.

58. We have changed of feeding volume and arrange of selvage waste to discuss the effect of basis weight, tensile strength and elongation of nonwoven.

59. Zero - span tension technology a and reliable method for assessing the axial tensile strength of softwood tracheids.

60. Meanwhile, the biological mechanics performance of different polyester fabric structures was characterized by permeability, void content, tensile strength, and bursting strength and so forth.